Produse pentru testul de magnet dc03 (9)

The permanent holding magnets achieve a holding force of up to 35,000 N in the de-energized state and are designed for long holding of magnetic workpieces. When the DC-excited coil is switched on, the permanent magnetic field on the holding surface is neutralized and the workpiece to be held can be removed. The electromagnet holds loads even in the event of a power failure and only needs to be energized briefly to release the workpiece. It is characterized by its energy efficiency and high holding forces. Nominal voltage:24 V Duty cycle:100 % Power consumption:6.2 W Diameter:32x40 mm Thermal class:E 120 

Die M521 Elektrohaftmagnete dienen zum gezielten und elektronisch steuerbaren Halten oder Lösen von Lasten in Handhabungs- und Transportanlagen. Die Haftmagnete sind in 2 verschiedenen Versionen erhältlich: - Halten (H): Elektrohaftmagnete, welche erst dann aufmagnetisieren und Werkstücke halten wenn Energie zugeführt wird. - Lösen (L): Hier werden Permanenthaftmagnete verwendet, welche magnetischen Werkstücke erst bei Energiezufuhr loslassen.

FÜGETECHNIKPRÜFUNG Die Fügetechnikprüfung führen wir mittels der Computertomografie durch. Fehlerhafte Verbindungen beim Schweiβen, Löten, Nieten oder Kleben werden schnell erkennbar. Die Auswertung der Fügetechnikprüfung erfolgt in 2D-Röntgenbildern, Schnittfilmen oder 3D-Darstellungen.

Wir führen für Sie den kompletten Stirnabschreckversuch nach DIN EN ISO 642 (Jominy-Versuch) an Ihren Werkstoffen oder Produkten aus. Wir führen für Sie den kompletten Stirnabschreckversuch (Jominy) an Ihren Werkstoffen oder Produkten aus. Fragen Sie uns über alle Medien gerne an.

Valuable, portable measuring microscope with integrated coaxial and angular incident illumination. steady, anodized aluminium body focussing by knurled ring and fine-pitch thread transformer with LED or battery LED lamp Magnifications:20x tos 800x Fields of view:8.9 mm to 0.35 mm Measurement range:Z 8 mm

Device details: ■ Device and operation are according to the standard IEC 60811-506 (IEC 60811-1-4) point 8.5 ■ Case set offers all required weights for the test ■ Easy operation ■ Very robust and solid construction ■ Steel impact piece included ■ Up to 3 Samples can be tested simultaneously ■ Device suitable for positioning in a cold chamber Options: ■ Cold Impact Test „one sample“ ■ Cold Impact Test „up to 3 samples“ ■ Cold Impact Test „1 x photovoltaics“ (VDE PV01:2008-02) ■ Laboratory freezer - technical specifications on request Size (width x length x height):200 x 200 x 520 mm / 7.9 x 7.9 x 20.5 Inch Weight:15 kg / 33.1 lbs Material:Stainless steel

Brandprüfungen für KfZ , Maschinen für Landwirtschaft und Forstwirtschaft Entflammbarkeit und Brandgeschwindigkeit nach DIN 75200, FMVSS 302 zur Bestimmung der Brenngeschwindigkeit von Werkstoffen der Kraftfahrzeuginnenausstattung. Akkreditiert nach DIN EN ISO/IEC 17025:2005 !

The tensiometers of the DCAT series are measuring instruments for force-based characterisation of surfaces and interfaces. Because of the compact and modular product design of the DCAT series, a bespoke combination of device and accessories can be found for any use case. The DCAT 25 is the multifunctional all-round model of the series. Measurements can be carried out at defined humidity and at temperatures between -15 °C and 300 °C. In addition it is possible to investigate the viscoelasticity of monolayers in combination with the Langmuir trough module LTMr. As the only tensiometer in the DCAT series, this model can analyse the adhesive force extensively thanks to an additional camera module. Measurements: - surface and interfacial tension - liquid density and solid density - dynamic contact angles - surface energy of solids - critical micelle concentration (CMC) - sedimentation and penetration - analysis of adhesive force - surface pressure - viscoelasticity of monolayers

Anisothermal stress relaxation test for determination of cross-linking density. - The TSSR-Meter can be used to perform conventional isothermal relaxation measurements as well as Temperature Scanning Stress Relaxation (TSSR), an anisothermal stress relaxation measurement method (AISR method). This method can be used to characterize the mechanical-thermal properties of elastomers. An important factor here is the determination of the cross-linking density. With the ever increasing demands on materials, the determination of crosslinking density is an important advantage, and therefore the TSSR meter is particularly suitable for material development and quality control during production.